Use up small bits and pieces of reed scrap and create beautiful bookmarks to use as gifts or to mark your favorite book.
Woven Bookmarks Tutorial Video
https://youtu.be/M1kpK8muJlQ
Supplies
Scrap Bookmarks Materials List
- Scraps of reed in a variety of sizes
- Titebond Instant Bond wood glue
Materials Source
If you are interested in investing in bulk materials rather than a kit be sure to check out the materials and tools section of our shop for all the specialty tools and materials you will need. Below are links to each of the supplies you will need.
- 1/2" Flat Reed
- 1/4" Flat Reed
- 5/8" Flat Reed
- 1/4" Flat-Oval Reed
- 5/8" Flat-Oval Reed
- #3 Round Reed
- #2 Seagrass
Tools
- Basket shears
- Spoke weight
- Titebond instant bond adhesive
- Measuring tape
- Pencil
- 2" metal clamps
- Spray bottle of water
- Water tub
- Towel
Cut List
- 5 stakes from 1/4" flat reed @ 8" long
Setting up a Workspace
Before you begin weaving, lay a large towel down on your work surface. This will catch any excess water as you work with the damp/wet reed.
Set another towel down to one side and place a bin of warm water on top of this towel. This bin will be where you soak the reed to keep things damp.
Finally lay out your tools in easy reach to one side where they won’t be in your way.
Cut Pieces
Using a measuring tape, cut reed pieces using the cut list above. Measure using a measuring tape, not previously cut reed, as this will result in varying lengths of reed.
Keep Reed Damp
As you work, keep the reed damp so that it stays pliable.
Weaving Instructions

Plain Weave Bookmark
Cut 5 pieces of 1/4“ wide reed (or anything thinner) to an eight-inch length.
Lay the strands out parallel. Weave lengths of scrap in perpendicularly. Weave in an under-over pattern. Make sure to alternate each row to ensure the weaving holds the piece together.
Once the piece is woven, you will use the glue to hold each piece around the outer edge. Clamp in place until dry. Trim the edges along the outer perimeter reed pieces to create a nice rectangle or square shape.
Get the entire piece wet and lay on a flat surface under spoke weights or a heavy book until dry to flatten and keep the glued sections secure until the glue has cured.
Twill Weave Bookmark
Cut 5 to 8 pieces of 1/4“ wide reed (or anything thinner) to an eight-inch length.
Lay the strands out parallel. Weave lengths of scrap in perpendicularly. Weave in an over-two, under one pattern. Make sure to alternate each row to ensure the weaving holds the pieces together. You will shift the over-two one stake to the right for each row to maintain the twill weave pattern angling upward to the right.
Weave using the pattern guide below. You will start at the bottom, weaving up from row one on the left until you’ve woven sixteen rows or your desired number of rows. If you use a piece of paper to cover the rows above or below where you are weaving, this will help you stay oriented and on pattern.

Finishing the Bookmark
Once the piece is woven, you will use the glue to hold each piece around the outer edge. Clamp in place until dry. Trim the edges along the outer perimeter reed pieces to create a nice rectangle or square shape.
Get the entire piece wet and lay on a flat surface under spoke weights or a heavy book until dry to flatten and keep the glued sections secure until the glue has cured.
