Turn an everyday essential into a charming accent with this tissue box basket! This handmade cover gives a plain tissue box a fresh look, adding a cozy touch to a bedside table, bathroom counter, or living room shelf. Choose a color that blends with your décor, or try a contrasting shade for a playful pop.
Below, you’ll find the pattern and step-by-step instructions to create your own tissue box basket. Gather your supplies, pick your favorite color, and let’s get started!
Supplies
Tissue Box Basket Materials List
- 35 feet 1/2" flat reed
- 10 feet #3 round reed
- 40 feet 3/8" flat reed
Materials Source
If you want to invest in bulk materials rather than a kit, check out the materials and tools section of our shop for the specialty tools and materials you will need. Below are links to each of the supplies you will need.
- 1/2" Flat Reed
- 1/4" Flat Reed
- 5/8" Flat Reed
- 1/4" Flat-Oval Reed
- 5/8" Flat-Oval Reed
- #3 Round Reed
- #2 Seagrass
Tools
- Basket shears
- Spoke weight
- Titebond instant bond adhesive
- Measuring tape
- Pencil
- 2" metal clamps
- Spray bottle of water
- Water tub
- Towel
Tissue Box Basket Kit
You can find a complete kit with all the reeds needed to complete one tissue box basket.
Tissue Box Basket Tutorial Video
Cut List
- 10 stakes from 1/2" flat reed @ 25"
Setting up a Workspace
Before you begin weaving lay a large towel down on your work surface. This will catch any excess water as you work with the damp/wet reed.
Set another towel down to one side and place a bin of warm water on top of this towel. This bin will be where you soak the reed to keep things damp.
Finally, lay out your tools in easy reach to one side where they won’t be in your way.
Cut Pieces
Using a measuring tape, cut reed pieces using the cut list above. Measure using a measuring tape, not previously cut reed, as this will result in varying lengths of reed.
Keep Reed Damp
As you work, keep the reed damp so that it stays pliable.
Weaving Instructions
- Lay out 5 of the stakes parallel to each other.
- Weave the second set of 5 stakes into the first set, alternating weave, matching up the center marks.
- Square the base by adjusting the width to measure 5 inches square.
- Twine around the perimeter of the base.
- Upset the stakes.
- Weave 13 rows of 3/8" flat reed.
- Weave the spokes over one and under one at an angle around the upper edge to get the scalloped edge finish.
- For the final spoke, fold over the first folded spoke and then tuck the end into the gap to the right of the first folded spoke.
- Allow the basket to dry fully. This may take a day or two.
- Sign and date the bottom of the basket with a permanent marker.
Staining or Sealing the Basket
Once your basket is completely dry you have the option to stain or seal it.
Sealing the basket will protect it from mold, mildew and wear from use.
Staining can change the reed's color to a different wood tone. You do this after the piece is woven because it seals the reed, eliminating its ability to soak up moisture (which is necessary for the weaving process).
Video: Staining and Sealing Baskets
