Stains and Sealers: A Guide for Basket Weavers

Stains and Sealers: A Guide for Basket Weavers

The stains and sealers suggested in this post are purely suggestions based on Brittany Stanton’s twenty years of experience. 

This is not an exhaustive list; you are welcome to try any variety of sealers and stains to finish your baskets. To test a sealer or stain, use scraps of reed to do a test application of the product you want to try. 

We get many emails and comments asking if this or that material works as a stain or sealer. Often the answer is, try it out and see. 

Staining Handwoven Baskets

General Steps to Finish a Handwoven Reed Basket with Stain

1. Test the stain on a scrap piece of reed to ensure desired color.

2. Lay out a drop cloth in a well-ventilated area

3. Apply the stain (brush for Minwax/Varathane, spray for Weavers Stain), working it into all crevices.

4. Wipe off any excess and check for drips.

5. Allow to dry thoroughly as per product instructions.

6. If using a pure stain, apply a clear sealer or polyurethane after the stain dries; skip this step for stain/poly combos or Weavers Stain.

This process ensures both color and protection, enhancing the beauty and longevity of handwoven reed baskets.

Stains to Finish Your Handwoven Baskets

Minwax Stains

Description:

Minwax stains are widely used oil- and water-based wood stains that penetrate reed baskets well, offering a broad range of color options from light natural tones to deep mahogany and even custom mixes. The oil-based stains soak into the reed, providing rich, lasting color, but require several days to fully cure and for the odor to dissipate. Water-based versions have less odor and dry faster.

Color Options:

Minwax offers many standard wood tones such as Fruitwood, Cherry, Golden Oak, and Walnut, and can be custom-mixed for unique shades, including by blending with acrylic paints for special effects.

Stain vs. Stain/Poly Combo:

Minwax also offers products like PolyShades, which combine stain and polyurethane in one step. This reduces finishing time by coloring and sealing at once, providing both color and surface protection in a single coat. Traditional stains require a separate sealer or polyurethane topcoat for protection.

Finishing Process:

  • Test the stain on scrap reed.
  • Apply with a bristle or foam brush, working into all crevices and wiping off excess.
  • Let dry thoroughly, applying additional coats if needed for depth.
  • If using a regular stain, finish with a clear sealer or polyurethane for protection.
  • For stain/poly combos, follow label directions—no additional topcoat is needed.

Varathane Stains

Description:

Varathane is another popular brand of wood stain, similar in use and effect to Minwax. It is available in both oil- and water-based formulas, with a reputation for vibrant colors and fast dry times (especially the water-based line). Varathane also offers stain/polyurethane combination products for one-step finishing.

Color Options:

Varathane stains come in a wide variety of wood tones and some fashion colors, comparable to Minwax. The selection includes classic wood hues and some unique shades, depending on the product line.

Stain vs. Stain/Poly Combo:

Like Minwax, Varathane offers both pure stains and stain/polyurethane combinations. The combo products color and seal simultaneously, while pure stains require a separate protective finish.

Finishing Process:

  • Test on scrap reed.
  • Apply with a brush or rag, ensuring even coverage.
  • Wipe off excess and let dry.
  • Apply a clear protective finish if using a pure stain, or skip this step with a stain/poly combo.

Weavers Stain

Description:

Weavers Stain is a specialized finish designed for reed baskets and chair seats. It is a spray-on product made from a blend of tung oil and urethane (not polyurethane), which helps avoid drying out the fibers. The fine mist application provides even coverage without the look or feel of spray paint.

Color Options:

Weavers Stain is available in several shades: Clear, Oak, Black Walnut, Walnut, Maple, and Driftwood.

Stain vs. Stain/Poly Combo:

Weavers Stain is unique in that it combines color and a sealing effect due to the tung oil and urethane mix, but it does not contain polyurethane, which can make reeds brittle over time. This makes it especially suitable for reed baskets, offering color and protection in one step.

Finishing Process:

  • Shake the can well.
  • Spray a fine mist over the basket, holding the can at an appropriate distance.
  • Allow to dry thoroughly.
  • Test on the bottom of the basket first to ensure satisfaction with the color.

Watco Danish Oil

Description:

Watco Danish Oil is a blend of oil and varnish that penetrates wood, enhancing grain and providing a natural, hand-rubbed look. It’s easy to apply, soaks in for a subtle finish, and offers light to moderate protection.

Color Options:

Available in a limited range of classic wood tones (Natural, Medium Walnut, Dark Walnut, Black Walnut, Cherry). The effect is subtle, mainly deepening the wood’s natural color.

Stain vs. Stain/Poly Combo:

Watco Danish Oil stains and seals in one step but doesn’t form a hard surface film like stain/poly combos. For extra durability, a clear topcoat of sealer can be applied (see sealer section).

Finishing Process:

  • Test on scrap wood.
  • Apply with brush or cloth, let soak, then wipe off excess.
  • Let dry 24 hours; repeat for richer color.
  • Optional: Add a clear topcoat for more protection.

Sealing Handwoven Baskets

General Steps to Finish a Handwoven Reed Basket with Sealer (typically clear)

Test the sealer on a scrap piece of reed to ensure desired color. Sealers are typical clear and will maintain the natural color of the reed. Some sealers may cause a slight color shift.

   2. Lay out a drop cloth in a well-ventilated area

  3. Apply the sealer. Most sealers come in spray cans. Hold the spray nozzle 10 to 12 inches   
   away from the basket and spray in even sweeping motions along the surface of the basket.  
   Work across the basket working in at an even tempo to create an even coating of sealer. 
   Turn the basket and do the same thing for each side. Spray the interior of the basket as 
   well. Don’t forget the bottom.

   4. Wipe off any excess and check for drips.

   5. Allow to dry thoroughly as per product instructions.

  6. Apply a second and third coat if you feel the coverage was thin. 

This process ensures longevity and protection, enhancing the beauty of handwoven reed baskets.

Weavers Stain 

Weavers Stain can also be used as a sealer as there is a natural clear finish option from this brand. Use it like you would other sealers to coat the basket. The results will be to darken the reed color very slightly. The result looks similar to the color of damp reed. 

Description:

Weavers Stain is a specialized finish designed for reed baskets and chair seats. It is a spray-on product made from a blend of tung oil and urethane (not polyurethane), which helps avoid drying out the fibers. The fine mist application provides even coverage without the look or feel of spray paint.

Color Options:

Weavers Stain is available in several shades: Clear, Oak, Black Walnut, Walnut, Maple, and Driftwood.

Stain vs. Stain/Poly Combo:

Weavers Stain is unique in that it combines color and a sealing effect due to the tung oil and urethane mix, but it does not contain polyurethane, which can make reeds brittle over time. This makes it especially suitable for reed baskets, offering color and protection in one step.

Finishing Process:

  • Shake the can well.
  • Spray a fine mist over the basket, holding the can at an appropriate distance.
  • Allow to dry thoroughly.
  • Test on the bottom of the basket first to ensure satisfaction with the color.

Deft Clear Wood Finish (Satin) Sealer 

Description:

Deft Clear Wood Finish in Satin is a nitrocellulose lacquer that provides a crystal-clear, non-yellowing protective finish for interior wood. It dries quickly, resists alcohol, water, and common spills, and is easy to apply with brush, pad, roller, or aerosol. The satin sheen offers a soft, low-gloss look suitable for basket reed.

Sheen & Appearance:

Satin finish delivers a subtle, elegant sheen that enhances wood grain without high gloss.

Protection & Durability:

Protects against water, alcohol, and household spills. Non-yellowing and resists aging, keeping wood looking fresh. Not recommended for floors or exterior use.

Finishing Process:

  • Prepare the basket- dust off and clean as necessary
  • Apply thin, even coats with brush, pad, roller, or spray.
  • Dries to touch in 30 minutes; recoat in 2 hours.
  • Apply 2 to 3 coats for best durability and appearance.

More Resources

Basket Weaving with Textile Indie on Youtube

Textile Indie 

Basket Weaving Collective

Back to blog