Small Planter Basket Instructions

Small Planter Basket Instructions

Give your favorite little plant a cozy new home with this small planter basket! This project adds a handmade touch to a shelf, windowsill, or desk while keeping the look simple and inviting. Make one to complement your own space, or create a thoughtful gift for a fellow plant lover.

Below, you’ll find the pattern and step-by-step instructions to make your own. Choose a color you love, gather your supplies, and let’s get started!

Small Planter Basket Tutorial Video 

Supplies

Small Planter Basket Materials List

  • 25 feet 3/8" flat reed
  • 20 feet #3 round reed
  • 40 feet 1/4" flat reed

Note: the lengths of reed do not have to be continuous lengths, just an approximation of that length, and can be multiple pieces.

Small Planter Basket Kit

You can find a complete kit with all the reeds needed to complete one small planter basket. 

Materials Source

If you are interested in investing in bulk materials rather than a kit be sure to check out the materials and tools section of our shop for all the specialty tools and materials you will need. Below are links to each of the supplies you will need. 

Tools 

Cut List

  • 10 spokes from 3/8" flat reed @ 18" long

Setting up a Workspace

Before you begin weaving, lay a large towel down on your work surface. This will catch any excess water as you work with the damp/wet reed.

Set another towel down to one side and place a bin of warm water on top of this towel. This bin will be where you soak the reed to keep things damp. 

Finally lay out your tools in easy reach to one side where they won’t be in your way.

Cut Pieces

Using a measuring tape, cut reed pieces using the cut list above. Measure using a measuring tape, not previously cut reed, as this will result in varying lengths of reed.

Keep Reed Damp

As you work, keep the reed damp so that it stays pliable.

Weaving Instructions

  • Lay the center marks of 5 spokes on top of each other, and arranging the spokes into a spiral pattern.
  • Twine around the base until you reach 3 1/2 inches in diameter.
  • Add the second set of 5 spokes between the previous spokes on top of what was just twined.
  • Twine the new spokes and the original set for another 1 inch for a total of 4 ½ inches in diameter.
  • Using a ¼” flat weaver, start to weave in an under-over plain weave.
  • Begin continuous weave spiraling around the basket base.
  • Weave using a stair-step spiral over-two-pattern each time you circle the basket. Weave until you have 16 rows.
  • Weave using tension and ease to create the desired basket shape.
  • Weave the spokes over one and under one at an angle around the upper edge to get the scalloped edge finish.
  • For the final spoke fold over the first folded spoke and then tuck the end into the gap to the right of the first folded spoke.
  • Allow the basket to dry fully. This may take a day or two.
  • Sign and date the bottom of the basket with a permanent marker.

Staining or Sealing the Basket

Once your basket is completely dry you have the option to stain or seal it. 

Sealing the basket will protect it from mold, mildew and wear from use.

Staining can change the reed's color to a different wood tone. You do this after the piece is woven because it seals the reed, eliminating its ability to soak up moisture (which is necessary for the weaving process).

Video: Staining and Sealing Baskets

More Resources

Basket Weaving with Textile Indie on Youtube

Textile Indie 

Basket Weaving Collective

Back to blog