Bread Basket Pattern and Instructions

Bread Basket Pattern and Instructions

The bread basket is a rectangular-based basket with a rounded upper edge. It can be woven in a customized pattern with your choice of colors and pattern. These instructions are a companion guide to the Youtube video tutorial. 

Dimensions: 14-inch long by 5 1/2- inch wide base with a wall that can reach up to 5 inches tall.

Bread Basket Tutorial Video Collection

Bread Basket 

Supplies

Bread Basket Materials List

  • 50 feet of 1/2" flat reed
  • 38 to 76 feet of weavers (sizes and colors of your choice)
  • 15 feet of 1/4" flat reed
  • 10 feet #3 round reed
  • 10 feet #2 seagrass
  • 10 feet 5/8" flat-oval reed

Note: the lengths of reed do not have to be continuous lengths, just an approximation of that length, and can be multiple pieces.

Materials Source

If you are interested in investing in bulk materials rather than a kit be sure to check out the materials and tools section of our shop for all the specialty tools and materials you will need. Below are links to each of the supplies you will need. 

Tools 

Bread Basket Weaving Outline

  • Cut stakes/mark centers
  • Lay out base
  • Twine the base
  • Upset the stakes
  • Weave the walls, pack rows together according to preference
  • Cut and tuck
  • Setting up the rim
  • Lashing the rim
  • Allow to dry for 24-48 hours
  • Finish with a stain or a wood sealer

Cut List

  • 17 stakes from 1/2-inch flat reed @ 20-inches long

  • 7 stakes from 1/2-inch flat reed @ 28-inches long

    Note: weavers for the walls do not get pre-cut

Setting up a Workspace

Before you begin weaving lay a large towel down on your work surface. This will catch any excess water as you work with the damp/wet reed.

Set another towel down to one side and place a bin of warm water on top of this towel. This bin will be where you soak the reed to keep things damp. 

Finally lay out your tools in easy reach to one side where they won’t be in your way.

Cut Pieces

Using a measuring tape, cut reed pieces using the cut list above. Measure using a measuring tape, not previously cut reed, as this will result in varying lengths of reed.

Keep Reed Damp

As you work, keep the reed damp so that it stays pliable.

Weaving Instructions

Weaving the Base

Lay out the shorter stakes on your work surface. Leave a small space between the stakes. 

Weave the longer stakes in the other direction, perpendicular to the shorter stakes - Weave one long stake down the center of the shorter stakes and then weave three stakes on either side of this center stake.

Twining the Base

Twine one row around the perimeter of the basket to hold all the stakes together.

Upset the Stakes

Fold up the stakes right along the edge of the twining. This will begin to train the stakes to stand upright.

Weaving the Walls

Weave the walls of the basket, measuring from the twining up the wall to 5 inches high. Within this space, you can choose the pattern, color, and layout of the basket. 

Either pre-plan your design or weave and design as you go.

Watch the video tutorial for a full step-by-step on how to start and end the rows of this basket.

Cut and Tuck

Cut the stakes behind the final row of weaving. All of the stakes that are in front of the final row of weaving need to be trimmed and then folded and tucked behind a few rows inside the basket.

Setting up the Rim

Cut a piece of 5/8-inch flat oval reed around the exterior of the basket. Cut a second piece at the same length.

Wrap these pieces snuggly against the upper edge of the basket. One piece around the outside edge and another around the inside edge. The inside edge piece should be turned so the rounded side faces inside the basket.

Use clamps to hold the rim pieces against the basket upper edge.

Insert a piece of seagrass between the two rim pieces.

Lashing the Rim

Using the 1/4-inch wide flat-oval reed create a loop around the inner rim and loop the reed to the outside of the basket. Tuck the end into the rim. You will put a stitch in between each set of stakes, under the top row of weaving. Pull the stitching tight around the rim as you go. This will ensure a strong and long-lasting rim.

Staining or Sealing the Basket

Once your basket is completely dry you have the option to stain or seal it. 

Sealing the basket will protect it from mold, mildew and wear from use.

Staining can change the reed's color to a different wood tone. You do this after the piece is woven because it seals the reed, eliminating its ability to soak up moisture (which is necessary for the weaving process).

Video: Staining and Sealing Baskets

More Resources

Basket Weaving with Textile Indie on Youtube

Textile Indie 

Basket Weaving Collective

Back to blog